WiNRADiO Future of radio
   

  WA-0108/H Antenna Distribution Unit - Preliminary Information
WA-0108/H Antenna Distribution Unit - Front Panel

The WiNRADiO WA-0108/H antenna distribution unit combines a low-noise amplifier and power splitter device in an optimum combination, particularly suited for general broadcasting or professional HF applications where a single antenna needs to be connected to up to 8 receivers. While this model is particularly suited for WiNRADiO multichannel receiver systems such as the MS-8118 Multichannel Radio Monitoring System, it can be also used with any third-party receivers and antennas.

Features

 Frequency range from 0.15 to 50 MHz
 Inbuilt low-noise preamplifier
 One antenna input, 8 receiver outputs
 High IP3 amplifier
 High isolation between ports
 Rack mount 1RU 19" enclosure
 Custom configurations available

Internally, the product consists of a low-noise preamplifier with a high third-order intercept point, followed by a high-isolation power splitter.

The WA-108/H antenna distribution units are eminently suitable for broadcasting, industrial, government, military and other demanding high-end applications.

Rear Panel

WA-0108/H Antenna Distribution Unit - Rear Panel
 

The single antenna input and 8 outputs use SMA-type connectors located at the rear of the device. The fused mains power socket accommodates standard US and European voltages using a standard IEC computer power cord.

Technical Specifications
Configuration 1 input, 8 outputs
Frequency range 0.15 to 50 MHz
Gain 2 dB @ 20 MHz typ.
Amplifier NF 8 dB @ 20 MHz typ.
Impedance 50 ohm (input and all outputs)
Max. input level +13 dBm for no damage
Input IP3 +27 dBm typ.
Isolation 50 dB typ.
Input VSWR 1 : 2.0
Output VSWR 1 : 1.3
RF Connectors 9 x SMA female
Power 120/240 V AC 15 W
Dimensions Width: 19" rack
Height: 1RU (1.75" = 44.5 mm)
Depth: 14.4" (365 mm)
Weight 13 lb (6 kg)

Note:
1. All values are typical.
2. Specifications are subject to change without notice due to continuous product development and improvement.

 

Interested? Please use our Rapid Response Form to register your interest in this product, or to request more information.